CP800 /CP900 Series
1. Magnetic Contacts - Flush Fitting Plastic

---

All types of contact are the same in size and appearance, high impact polystyrene.  All contacts are individually tested and packed.  Fixing pins are included.  The wiring connections vary as detailed in the table below:

• 'P' switch and wiring connections are potted in flexible epoxy resin
• 3 and 3 wire connections - 3*7/0.2*0.3 metre
• 4 core connections - 4*7/0.2 sheathes*1.0 metre

back to top

CP300 / CP400 Series
2. Magnetic Contacts - Flush Fitting Plastic

---

All types of contact are the same in size and appearance, high impact polystyrene.  All contacts are individually tested and packed.  The wiring connections vary as detailed in the table below:

• 'P' switch and wiring connections are potted in flexible epoxy resin
• 3 and 3 wire connections - 3*7/0.2*0.3 metre
• 4 core connections - 4*7/0.2 sheathes*1.0 metre

back to top

CP100 /CP200 Series
3. Magnetic Contacts - Flush Fitting Plastic

---

All types of contact are the same in size and appearance, high impact polystyrene.  All contacts are individually tested and packed, fixing screws included.  The wiring connections vary as detailed in the table below:

• 'P' switch and wiring connections are potted in flexible epoxy resin
• 3 and 3 wire connections - 3*7/0.2*0.3 metre
• 4 core connections - 4*7/0.2 sheathes*1.0 metre

back to top

CP500 / CP600 Series
4. Magnetic Contacts - Surface Mounting Plastic

---

All types of contact are the same in size and appearance, high impact polystyrene.  All contacts are individually tested and packed.  Fixing screws are included.  The wiring connections vary as detailed in the table below:

• 'P' switch and wiring connections are potted in flexible epoxy resin
• 3 and 3 wire connections - 3*7/0.2*0.3 metre
• 4 core connections - 4*7/0.2 sheathes*1.0 metre

back to top

CA200 Series
5. Magnetic Contacts - Surface Mounting Aluminium

---

All types of contact in the CA200 series are the same in size and appearance as the CA205 opposite.  All contacts are individually  tested and packed.  The CA 203 series is the armoured version.   The wiring connections vary as detailed below:

• 'P' switch and wiring connections are potted in flexible epoxy resin
• 4 core connections - 4*7/0.2 sheathes*1.0 metre
• 4 WA connections - 4*7/0.2 in galvanised steel armouring*0.5 metre

back to top

CA400 & CA500 Series
6. Magnetic Contacts - Surface Mounting Aluminium Heavy Duty

---

All types of switches in the CA400 & CA500 series are the same in size and appearance. The CA400 series is available in 30mm & 25mm OP Gap and the CA500 is available in the larger magnet 50mm & 45mm OP Gap.  The bracket shown in the picture opposite can be fitted to magnet switch or both.  The wiring connections vary as detailed in the table below.

• 'P' switch and wiring connections are potted in flexible epoxy resin
• 4 core connections - 4*7/0.2 sheathes*1.0 metre
• 4 WA connections - 4*7/0.2 in galvanised steel armouring*0.5 metre
• Use products types above with a BK suffix to order the bracket

back to top

CA700 Series
7. Magnetic Contacts - Surface Mounting Roller Shutter

---

All types of contact in the CA700 series are the same in size and appearance, die-cast aluminium, as the pictured CA701 & CA702 opposite. The wiring connections vary are detailed below:

• 'P' switch and wiring connections are potted in flexible epoxy resin
• 4 core connections - 4*7/0.2 sheathed x 1.0 metre
• 4 WA connections - 4*7/0.2 in galvanised steel armouring*0.5 metre

back to top

JB100 DCJ/B DCJB/B-Loop
8. Junction Boxes

---

Plastic JB 100
- 6 way junction box
- Magnetic tamper
- High impact polystyrene

 DCJ/B
- Die Cast box & lid.  Back of box machined 1*10mm + 2* 5.0mm diameter holes
- 6 way junction box fitted with magnetic tamper

DCJ/B Loop
- 2 DCJ/B's fitted with 0.5m (or as specified) flexible armour

DCB
- As above, back of box machined as above but without junction box and tamper  

back to top

9. Final Exit Buttons

---

SB101 - Die cast surface mount final exit button

 

FB101 - High impact poly flush mount final exit button

 

back to top

SK100 & SK200 Series
10. Key Operated Switches - Surface Mounting

Available in natural die cast aluminium or white gloss finish.  Other finishes available on request. Dimensions:

- SK151 - 111mm*60mm*31mm
- SK251 - 92mm*40*43mm

The details of the switches are as follows:

• All types fitted with magnetic tamper
• 2000 different locks for SK151 & Sk251 
• 200 different locks for SK253 & SK254
• Two keys supplied
• Variations to the standard specification are possible subject to order quantity
• Also available "Keyed Alike"
• Spare key blanks available

back to top